Sony VGF-HS1 - Manual (Page 52)


VGF-HS1 3-98-360-11(1)
Others
Updating the Firmware
You can update the firmware of your Home Server with the automatically downloaded update files or by
accessing the support Web site.
Note
Do not update the firmware while a Home Server backup process to the USB hard disk drive is in progress or the
One Touch Copy function is active.
Updating the firmware with the automatically downloaded update
files
When a firmware update file is downloaded to your Home Server via the Internet, the INFO indicator light
turns on in blue.
Follow the steps below to update the firmware.
1
Access the Home Server Settings Page (page ).
2
Click “Firmware update” in the left pane.
The Firmware update page is displayed in the right pane.
3
Confirm that the message “New firmware version is available” is displayed to the right
of the Status in the Automatic Update section.
4
Check the version in the New version field.
5
Click “Start update” in the New version section.
The Start update page is displayed.
6
Thoroughly read the terms and conditions of the end user license agreement and click
“I Agree.”
The firmware update begins and the  (POWER) indicator light on the Home Server blinks
alternately in green and orange.
When the  (POWER) indicator light stops blinking, the Home Server restarts.
The new firmware will be activated after the restart.