Sony VGF-HS1 User Manual

Page 14

Advertising
background image

1

VGF-HS1 3-98-360-11(1)

About the (USB) ports

The USB ports on your Home Server is compliant with the USB 2.0 standards (High-speed, Full-speed, and

Low-speed). The USB 2.0 standards are new Universal Serial Bus (USB) standards and provide faster data

transfer than the USB 1.1 standards (Full-speed and Low-speed). The USB ports of the USB 2.0 standards

are capable of accepting the USB 1.1 standard devices.

About the indicator lights

The indicator lights help you obtain various kinds of information on your Home Server.

Indicator
light

State

COPY

Lights in green

Indicates that the USB mass storage class device, such as a digital

still camera, a digital camcorder, or a USB hard disk drive is

connected or a memory card is inserted.

Tip

If a USB port is specified for the Home Server backup operation (page

49), connecting a USB device to the port does not turn on this

indicator light as the One Touch Copy function is disabled for the port.

Blinks in green

Indicates that the One Touch Copy function is in operation.

Unlit

Other than the above.

NETSERVER Lights in green

Indicates that the Home Server is open to access via the Internet.

Blinks in green

Indicates that the server test (page 42) is in progress.

Unlit

Indicates that:

The previous server test (page

42

) failed.

The NETSERVER switch is turned off.

(POWER)

Blinks in orange

Indicates that the Home Server is turning on.

Lights in green

Indicates that the Home Server is completely turned on and the
hard disk drive is in operation.

Lights in orange

Indicates that the Home Server is completely turned on, but in

power saving mode. The internal hard disk drive is not in

operation while the Home Server is in this mode.

Tip

After about 30 minutes of inactivity following completion of the

internal process, the Home Server stops the hard disk drive operation

and enters power saving mode.

Blinks in green

Indicates that the Home Server is turning off.

Blinks alternately in

green and orange

Indicates that the firmware update is in progress.

Unlit

Indicates that the Home Server is turned off.

Advertising
This manual is related to the following products: