Sony VGF-HS1 - Manual (Page 28)

8
VGF-HS1 3-98-360-11(1)
Importing data with the One Touch Copy function

To import from a USB device
Note
When the USB port on the digital still camera is in PTP or PictBridge mode, you cannot use the One Touch Copy
function. Place the USB port into mass storage mode before proceeding with the following steps.
1
Connect a digital still camera or a digital camcorder to one of the (USB) ports on the
Home Server with a USB cable.
The COPY indicator light on the Home Server turns on.

Tip
If no content has been updated since the previous import, the COPY indicator light will not turn on.
COPY indicator light
Note
If you connect a USB device to the USB port specified for Home Server backup (page 49), the content will
not be imported to the Home Server.
2
Press the COPY button.
COPY button
The message notifying the progress of the copy process appears on the display on your Home Server and
the COPY indicator light blinks while the copy process is in progress.
Upon completion of the copy process, the completion message appears on the display and the COPY
indicator light turns off.
For viewing the destination folder, see “To view the copied photo and video contents” on page 30.
3
Wait until the COPY indicator light turns off, and then unplug the USB cable.