Sony DCR-IP210 - Manual (Page 11)

Quick Start Guide
11
Recording a picture
(p. 29)
Monitoring the playback picture on the LCD
screen
(p. 42)
Note
Do not pick up your camcorder by
the LCD panel or the jack cover.
2
Press of the touch panel to
rewind the tape.
3
Press of the touch panel to start
playback.
1
Remove the lens cap.
3
Open the LCD panel. The
picture appears on the LCD
screen. When you purchase your camcorder, the clock setting is not
set up yet. Set the clock setting before recording (p. 22).
Viewfinder
When the LCD panel is closed with the
LCD screen facing inwards, use the
viewfinder.
Adjust the viewfinder lens to your
eyesight (p. 32).
2
Set the POWER switch
to CAMERA. The
CAMERA lamp lights
up.
MEMOR
Y/NETW
ORK
CAMERA
POWER
(CHG)
OFF
ON
MODE
VCR
4
Press START/STOP. Your
camcorder starts recording.
To stop recording, press
START/STOP again.
1
Set the POWER switch
to VCR.
The VCR lamp lights up.
MEMOR
Y/NETW
ORK
CAMERA
POWER
(CHG)
OFF
ON
MODE
VCR
Note
When using the touch panel, press
operation buttons lightly with your finger
or the supplied stylus (DCR-IP220 only).
Do not press the LCD screen with sharp
objects other than the stylus supplied
(DCR-IP220 only).