Sony DCR-IP210 - Manual (Page 134)

134
Recording a moving picture from other equipment
Before operation
Set DISPLAY in
to LCD in the menu settings. (The default setting is LCD.)
(1) Set the POWER switch to VCR.
(2) When using the A/V connecting cable, set VIDEOINPUT to the appropriate
position depending on the player. (p. 83)
(3) Play back the recorded tape on the VCR, or turn the TV on to see the desired
program.
The image of the other equipment is displayed on the LCD screen or in the
viewfinder.
(4) Press START/STOP at the scene where you want to start recording from.
Using the A/V connecting cable
If your TV or VCR has an S video jack
Connect using the S video plug to faithfully obtain original pictures. With this
connection, you do not need to connect the yellow (video) plug of the A/V connecting
cable. Connect the S video plug to the S video jack of the VCR.
Recording a picture from a tape as a moving picture
S VIDEO
VIDEO
AUDIO
OUT
A/V
Yellow
Black
: Signal flow
A/V connecting cable (supplied)
VCR
White
Red