Sony DCR-IP210 - Manual (Page 86)

86
Recording video or TV programs
When using the i.LINK cable
Simply connect the i.LINK cable (optional) to the i.LINK (MICROMV Interface) of your
camcorder and to the i.LINK (MICROMV Interface) of the MICROMV product. With
digital-to-digital connection, video and audio signals are transmitted in digital form for
high-quality editing. (You cannot connect your camcorder to a DV product.)
(1) Insert a blank tape (or a tape you want to record over) into your camcorder,
and insert the recorded tape into VCR.
(2) Set the POWER switch to VCR.
(3) Start playback on VCR. The picture from the VCR appears on the LCD screen
of your camcorder.
(4) Set your camcorder in the recording pause mode.
Press FN and go to PAGE3, then press q REC CTRL. Next, press REC
PAUSE.
(5) Press REC START at the scene where you want to start recording.
4,5
PAGE1 PAGE2 PAGE3 EXIT
REC
PAUSE
RET.
REC
START
4
FN PAGE3
REC CTRL
DATA
CODE
COUNT
RESET
REC
CTRL
zX 0:01:18
i.LINK (MICROMV
Interface)
: Signal flow
i.LINK cable (optional)
i.LINK (MICROMV
Interface)
When you have finished dubbing a tape
Press on the LCD screen to stop recording on your camcorder and stop playback
on VCR or TV.