Recording images with the flash – Sony DCR-IP210 User Manual

Page 49

Advertising
background image

49

Advanced Recording Operations

Recording images with the flash

The flash pops up automatically. The default setting is auto (no indicator). To change
the flash mode, press (flash) repeatedly until the flash mode indicator appears on the
LCD screen.

Each press of (flash) changes the indicator as follows:

t

t AUTO (No indicator)

When you set RED EYE R in

to ON in the menu settings (p. 178), the indicator

changes as follows:

t t

Forced flash:

The flash fires regardless of the surrounding
brightness.

Auto red-eye reduction:

The flash fires before recording to reduce red-eye.

Forced red-eye reduction: The flash fires before recording to reduce red-eye

regardless of the surrounding brightness.

No flash:

The flash does not fire.

The amount of flash is automatically adjusted to the appropriate brightness. You can
also change FLASH LVL to the desired brightness in the menu settings (p. 178). Try
recording various images to find the most appropriate setting for FLASH LVL.

Notes
• The recommended shooting distance using the built-in flash is 0.3 m to 2.5 m (31/32

feet to 8 1/3 feet).

• Attaching the lens hood (supplied) or a conversion lens (optional) may block the light

from the flash or cause lens shadow to appear.

• Auto red-eye reduction ( ) and Forced red-eye reduction (

) may not produce the

desired effect depending on individual differences, the distance to the subject, the
subject not looking at the pre-recording flash or other conditions.

• The flash effect cannot be obtained easily when you use forced flash in a bright

location.

• When recording with the flash, it takes longer to prepare for image capture. This is

because your camcorder starts to charge power for firing after the flash pops up.

• The flash charge lamp flashes while the power for firing is being charged. After

charging is completed, the flash charge lamp lights up.

• If it is not easy to focus on the subject automatically, for example, when recording in

the dark, use the focal distance information (p. 67) for focusing manually.

Recording still images on a “Memory Stick” in CAMERA mode

(flash)

Advertising
This manual is related to the following products: