Sony DCR-IP210 - Manual (Page 182)

182
Changing the menu settings
Icon/item
MEMORY SET
SLIDE SHOW
FILE NO.
DELETE ALL
FORMAT
Notes on formatting
•The “Memory Stick” supplied with your camcorder has been formatted at factory.
Formatting with your camcorder is not required.
• Do not do any of the following while FORMATTING is displayed:
– Turn the POWER switch to the other position
– Operate buttons
– Eject the “Memory Stick”
•You cannot format the “Memory Stick” if the write-protect tab on the “Memory Stick”
is set to LOCK.
•Format the “Memory Stick” with your camcorder if “ FORMAT ERROR”appears.
•The original sample images recorded on the supplied “Memory Stick” will be erased.
•Formatting erases protected image data on the “Memory Stick.”
Mode
——
z SERIES
RESET
——
z RETURN
OK
Meaning
To play back images in a continuous loop
(p. 145)
To assign numbers to file in sequence even if the
“Memory Stick” is changed
To reset the file numbering each time the
“Memory Stick” is changed
To delete all the unprotected images (p. 149)
To cancel formatting
To format an inserted “Memory Stick”
Formatting erases all information on the
“Memory Stick”
1. Press
r/R to select FORMAT then press EXEC.
2. Press r/R to select OK, then press EXEC.
3. After “EXECUTE” appears, press EXEC.
“FORMATTING” flashes during formatting.
“COMPLETE” appears when formatting is
finished.
POWER
switch
MEMORY
MEMORY
VCR
MEMORY
MEMORY