Sony DCR-IP210 - Manual (Page 28)

28
Step 4 Using the touch panel
Notes
•When using the touch panel, press the LCD screen lightly with your finger or the
supplied stylus (DCR-IP220 only).
•Do not press the LCD screen with sharp objects other than the supplied stylus (DCR-
IP220 only).
•Do not press the LCD screen too hard.
•Do not touch the LCD screen with wet hands.
•If FN is not on the LCD screen, touch the LCD screen lightly to make it appear. You
can make the display appear or disappear with DISPLAY/TOUCH PANEL on your
camcorder.
•When the operation buttons do not work even if you press them, an adjustment is
required (CALIBRATION) (p. 204).
•When the LCD screen gets dirty, use the supplied cleaning cloth.
When executing each item
The green bar appears above the item.
If an item is not available
The color of the items changes to gray.
Press FN to display the following buttons:
In CAMERA mode
PAGE1 SPOT FOCUS, MENU, SELF TIMER, END SCH, EXPOSURE, SPOT METER
PAGE2 TITLE, DIG EFFT, MEM MIX
PAGE3 LCD BRT, VOL, COUNT RESET
In VCR mode
PAGE1 MENU, VOL, TITLE, MULTI SCH
PAGE2 LCD BRT, DIG EFFT, PB ZOOM, END SCH
PAGE3 DATA CODE, COUNT RESET,
REC CTRL
See page 104 when you set the POWER switch to MEMORY.