Sony DCR-IP210 User Manual
Page 116
116
Recording still images on a “Memory Stick”
– Memory photo recording
Recording images with the flash
The flash automatically pops up to strobe. The default setting is auto (no indicator). To
change the flash mode, press (flash) repeatedly until the flash mode indicator
appears on the LCD screen.
Each press of (flash) changes the indicator as follows:
t
t AUTO (No indicator)
When you set RED EYE R in
to ON in the menu settings (p. 178), the indicator
changes as follows:
t t
Forced flash:
The flash fires regardless of the surrounding
brightness.
Auto red-eye reduction:
The flash fires before recording to reduce the red-eye.
Forced red-eye reduction: The flash fires before recording to reduce red-eye
regardless of the surrounding brightness.
No flash:
The flash does not fire.
The amount of flash is automatically adjusted to the appropriate brightness. You can
also change FLASH LVL to the desired brightness in the menu settings (p. 178). Try
recording various images to find the most appropriate setting for FLASH LVL.
Notes
•The recommended shooting distance using the built-in flash is 0.3 m to 2.5 m (31/32
feet to 8 1/3 feet).
•Attaching the lens hood (supplied) or a conversion lens (optional) may block the light
from the flash or cause lens shadow to appear.
•Auto red-eye reduction ( ) and Forced red-eye reduction (
) may not produce the
desired effect depending on individual differences, the distance to the subject, the
subject not looking at the pre-recording flash or other conditions.
•The flash effect cannot be obtained easily when you use forced flash in a bright
location.
•The flash charge lamp flashes while the power for firing is being charged. After
charging is completed, the flash charge lamp lights up.
•If it is not easy to focus on a subject automatically, for example, when recording in the
dark, use HOLOGRAM AF (p. 117) or the focal distance information (p. 67) for
focusing manually.
If you leave your camcorder for five or more minutes after removing the power
source
Your camcorder returns to the default setting (auto).
(flash)