Sony DCR-IP210 - Manual (Page 84)

84
2 Making a recording
Before operation
Set DISPLAY in
to LCD in the menu settings. (The default setting is LCD.)
(1) Insert a blank tape (or a tape you want to record over) into your camcorder. If
you are recording a tape from the VCR, insert a recorded tape into the VCR.
(2) Set the POWER switch to VCR.
(3) Set your camcorder in the recording pause mode.
Press FN and go to PAGE3, then press q REC CTRL. Next, press REC
PAUSE.
(4) Start playback on VCR if you record a tape from VCR. Select a TV program if
you record from TV. The picture from VCR or TV appears on the LCD screen
or in the viewfinder.
(5) Press REC START at the scene where you want to start recording from.
Recording video or TV programs
3,5 3
FN
PAGE1 PAGE2 PAGE3 EXIT
DATA
CODE
COUNT
RESET
REC
CTRL
REC
PAUSE
REC CTRL
RET.
PAGE3
zX 0:01:18
S VIDEO
VIDEO
AUDIO
OUT
REC
START
: Signal flow
White
Red
A/V connecting cable
(supplied)
Yellow
Black
A/V
VCR
When you have finished dubbing a tape
Press on the LCD screen to stop recording on your camcorder and stop playback
on VCR or TV.