Sony DCR-IP210 - Manual (Page 25)

25
Getting Started
(1) Prepare the power source (p. 17).
(2) Slide OPEN/Z EJECT in the direction of the arrow and open the lid. The
cassette compartment automatically lifts up and opens.
(3) Push the middle portion of the back of the cassette into the cassette
compartment.
Insert the cassette in a straight line deeply with the cassette window facing the
cassette lid.
(4) Close the cassette compartment by pushing down the cassette lid halfway. The
cassette compartment automatically goes down.
(5) After the cassette compartment goes down completely, close the lid.
To eject a cassette
Follow the procedures above, and take out the cassette after the cassette compartment
opens completely in step 2.
Note
Do not press the cassette compartment down. Doing so may cause a malfunction.
To prevent accidental erasure
Slide the write-protect tab on the cassette to expose the red mark.
Step 3 Inserting a cassette
Cassette window
4,5 3 2
Cassette lid
OPEN/Z EJECT
Cassette
compartment