Sony HDR-TD10 - Manual (Page 15)

1
Table of C
on
ten
ts
Enjo
y U
seful F
unc
tions
Inde
x
US
Getting started
Step 1: Charging the battery pack
You can charge the “InfoLITHIUM” battery pack (V series) after attaching it to your
camcorder.
Notes
You cannot attach any “InfoLITHIUM” battery pack other than the V series to your camcorder.
1
Turn off your camcorder by closing the LCD screen.
2
Attach the battery pack by sliding it in the direction of the arrow until it
clicks.
3
Connect the AC Adaptor and the power cord (mains lead) to your
camcorder and the wall outlet (wall socket).
The /CHG (flash/charge) lamp lights up and charging starts. The /CHG (flash/charge)
lamp turns off when the battery pack is fully charged.


/CHG (flash/charge) lamp
Battery pack
DC IN jack
To the wall outlet (wall
socket)
AC Adaptor
DC plug
Power cord (Mains
lead)
Align the  mark on the DC plug with that on
the DC IN jack.