Sony HDR-TD10 - Manual (Page 83)


Table of C
on
ten
ts
Enjo
y U
seful F
unc
tions
Inde
x
US
If you stop performing [Empty] while
[Executing...] appears, be sure to complete the
operation by performing [Format] or [Empty]
when you use the camcorder next time.
Repair Img. DB F.
See page 94, 97.
File Number
You can select the way to assign file number
of photos.
 Series
Assigns file numbers of photos in sequence.
The file number becomes larger each time
you record a photo.
Even if the memory card is replaced with
another one, the file number is assigned in
sequence.
Reset
Assigns file numbers in sequence, following
the largest file number existing on the
recording medium.
When the memory card is replaced with
another one, the file number is assigned for
each memory card.
Data Code
During playback, your camcorder displays
the information (Date/Time, Camera
Data) recorded automatically at the time of
recording.
 Off
Data code is not displayed.
Date/Time
Displays the date and time.
Camera Data
Displays camera setting data.

Date/Time
 Date
 Time
Camera Data
 SteadyShot off
 White Balance
 Shutter Speed
 IRIS (Aperture value)
 Gain
 Brightness
 Exposure
 Flash
Tips
The data code is displayed on the TV screen if
you connect your camcorder to a TV.
The indicator toggles through the following
sequences as you press DATA CODE on the
Wireless Remote Commander: [Date/Time] 
[Camera Data]  [Off] (no indication).
Depending on the recording media condition,
bars [--:--:--] appear.




Movie
Photo