Sony HDR-TD10 - Manual (Page 46)


Table of C
on
ten
ts
Enjo
y U
seful F
unc
tions
Inde
x
US
[Highlight Point]
You can set the points in a movie or photo that
will be used in a Highlight Playback.
Play the desired movie or photo, and then do
the following.
Movie: Play the desired movie, and then
touch  at the point you want to
use in a Highlight Playback.
Photo: Play the photo you want to use in a
Highlight Playback, and then touch .
Notes
The audio used for the Highlight Playback will
be converted to 2ch stereo.
The [Playback Range] setting is cleared when
the Highlight Playback stops.
When you connect the camcorder to an
external device, such as a TV, and watch
Highlight Playback or Highlight Scenario, these
images do not appear on the LCD screen of the
camcorder.
Tips
You can select [Highlight Setting] on the screen
after a Highlight Playback has finished.
You can transfer music files from audio CDs
or MP3 files to your camcorder, and play them
with Highlight Playback using the supplied
software “PMB” or “Music Transfer,” a software
installed together with “PMB.”
After the music file is transferred to the
camcorder, if you cannot play the music, the
music file may be damaged. Delete the music
file by touching (MENU)  [Setup]
 [ ( Playback Settings)]  [Empty
Music], then transfer the music file again. If
you delete music files using [Empty Music], the
music data recorded on your camcorder at the
factory will be deleted too. In this case, you can
restore them using Music Transfer, a software
installed together with “PMB.” For operating
instructions, see Music Transfer help.











Saving Highlight
Playback (
Scenario
Save)
You can save a Highlight Playback as a
“Scenario.”
Touch  [
Scenario Save] 
during Highlight Playback.
To play back a saved scenario
Touch (MENU)  [Playback Function]
 [ Scenario], select the desired scenario, and
then touch
.
To erase a saved scenario
Touch [ Scenario Erase] on the screen
after the scenario playback you want to
erase has finished, or touch while
playing the scenario you want to erase, then
select [ERASE].
Converting and sharing
Highlight Playback scenes
or Highlight scenarios
You can convert the data format of
Highlight Playback or previously saved
Highlight scenarios which allows you to
share the converted data using other media
by creating DVDs or uploading the data to
the Web (Highlight Movie). The converted
data will be changed to 2D.