Sony HDR-TD10 - Manual (Page 85)


Table of C
on
ten
ts
Enjo
y U
seful F
unc
tions
Inde
x
US
HDMI 3D Setting
Select the output format of the right and left
images when connecting your camcorder to
a 3D TV with the HDMI cable (supplied).
Auto
Normal setting (outputs the images
according to the TV, automatically).
 Frame Packing
Outputs the right and left images in full
high definition image quality as they were
recorded.
Side-by-Side
Halves the resolution of the right and left
images in full high definition image quality,
and outputs the right and left images
aligned side by side.
HDMI Resolution
Select the output image resolution when
connecting your camcorder to a TV with
the HDMI cable (supplied).
 Auto
Normal setting (outputs the signal according
to the TV automatically).
1080p/480p
Outputs high definition image quality (HD)
movies with a 1080p signal and standard
image quality (STD) movies with a 480p
signal.
1080i/480i
Outputs high definition image quality (HD)
movies with a 1080i signal and standard
image quality (STD) movies with a 480i
signal.
720p/480p
Outputs high definition image quality (HD)
movies with a 720p signal and standard image
quality (STD) movies with a 480p signal.
480p
Outputs the 480p signal.
480i
Outputs the 480i signal.
Notes
When [ Frame Rate] is set to [60p] and
[HDMI Resolution] is set to [720p/480p] or
[480p], HDMI signals cannot be output during
recording.
CTRL FOR HDMI
(Control for HDMI)
When connecting your camcorder to a
“BRAVIA” Sync compatible TV with the
HDMI cable (supplied), you can play back
movies on your camcorder by aiming the
TV’s Remote Commander at the TV (p. 37).
 On
Operates your camcorder using the TV’s
Remote Commander.
Off
Does not operate your camcorder using the
TV’s Remote Commander.
USB Connect
Select this item when [USB Select] does not
appear on the LCD screen by connecting
the camcorder to a computer with the USB
cable (supplied).
See page 63.

