Sony HDR-TD10 - Manual (Page 77)


Table of C
on
ten
ts
Enjo
y U
seful F
unc
tions
Inde
x
US
Smile Sensitivity
Sets the smile detection sensitivity for using
the Smile Shutter function.
Slight Smile
Detects even a slight smile.
 Normal Smile
Detects a normal smile.
Big Smile
Detects a big smile.
Flash
You can select the flash setting when you
record photos using the built-in flash, or
an external flash (sold separately) that is
compatible with your camcorder.
 Auto
Automatically flashes when there is
insufficient ambient light.
On ( )
Always uses the flash regardless of the
surrounding brightness.
Off ( )
Records without flash.
Notes
The recommended distance to the subject when
using the built-in flash is approximately 0.3 m
to 1.5 m (1 foot to 5 feet).
Remove any dust from the surface of the flash
before using it. Flash effect may be impaired if
heat discoloration or dust obscures the lamp.
The /CHG (flash/charge) lamp (p. 15) flickers
while charging the flash, and remains lit when
the battery charge is complete.
If you use the flash in bright places such as
when shooting a backlit subject, the flash may
not be effective.
The flash does not flash in movie recording
mode.






Flash Level
You can set this function when you
record photos using the built-in flash, or
an external flash (sold separately) that is
compatible with your camcorder.
High ( )
Makes the flash level higher.
 Normal ( )
Low ( )
Makes the flash level lower.
Red Eye Reduction
You can set this function when you
record photos using the built-in flash, or
an external flash (sold separately) that is
compatible with your camcorder.
You can prevent redeye by activating the
pre-flash before the flash flashes.
 Off
Does not use Red Eye Reduction to prevent
redeye.
On ( )
Uses Red Eye Reduction to prevent redeye.
Notes
The redeye reduction may not produce the
desired effect due to individual differences and
other conditions.
The redeye function does not work with
automatic recording by [Smile Shutter].


