Sony HDR-TD10 - Manual (Page 78)


Table of C
on
ten
ts
Enjo
y U
seful F
unc
tions
Inde
x
US
Blt-in Zoom Mic
You can record a movie with vivid sound
appropriate to the zoom position.
 Off
The microphone does not record sound
following zooming in or out.
On ( )
The microphone records sound following
zooming in or out.
Wind Noise Reduct.
You can record a movie with less wind
noise by cutting the low-frequency sound
input from the built-in microphone.
 Off
Disables wind noise reduction.
On ( )
Enables wind noise reduction.
Notes
If you turn the [Wind Noise Reduct.] function
to [On], the [Blt-in Zoom Mic] function turns
off automatically.
Audio Mode
You can change the recording sound
format.
 5.1ch Surround ( )
Records sound in 5.1ch surround.
2ch Stereo ( )
Records sound in 2ch stereo.


Micref Level
(Microphone
reference level)
You can select the microphone level for
recording sound.
 Normal
Records various ambient sounds, converting
them into the appropriate level.
Low ( )
Records ambient sound faithfully. Select
[Low] when you want to record an exciting
and powerful sound in a concert hall, etc.
(This setting is not suitable for recording
conversations.)
Guide Frame
You can display the frame and check that
the subject is horizontal or vertical.
The frame is not recorded.
 Off
Does not display the guide frame.
On
Displays the guide frame.
Tips
Positioning the subject at the cross point of the
guide frame makes a balanced composition.
The outer frame of [Guide Frame] shows the
display area of a TV which is not compatible
with full pixel display.


