Sony HDR-TD10 - Manual (Page 94)


Table of C
on
ten
ts
Enjo
y U
seful F
unc
tions
Inde
x
US
is indicated on a thumbnail.
This may appear on an image recorded on
other devices, edited on a computer, etc.
You removed the AC Adaptor or the battery
pack while the recording media icon at the top
right corner of the screen flashes, or before
the access lamp is turned off after recording.
This may damage your image data and is
displayed.
is indicated on a thumbnail.
The image data base file may be damaged.
Check the data base file by touching
(MENU)  [Setup]  [ ( Media
Settings)]  [Repair Img. DB F.]  the
recording medium. If it still appears, delete the
image with (p. 47).
No sound or only a quiet sound is heard
during playback.
Turn up the volume (p. 32).
When you record sound with [Micref Level]
(p. 78) set to [Low], the recorded sound may
be difficult to hear.
Sounds cannot be recorded while shooting
with [Smth Slw REC] or [Golf Shot].
Left and right sounds are heard
unbalanced when playing back movies on
computers or other devices.
Change the sound conversion type (downmix
type) when playing back on 2ch stereo devices.
Refer to the instruction manual supplied with
your playback device for details.
Change the sound to 2ch when creating a disc
using the supplied software “PMB.”
This happens when sound recorded in 5.1ch
surround is converted to 2ch (normal stereo
sound) by a computer or other device. This is
not a malfunction.
Record sound with [Audio Mode] set to [2ch
Stereo] (p. 78).










The demonstration movies cannot be
played in 3D.
Select the internal memory for the recording
media, and set the 2D/3D switch to 3D (p. 26).
The demonstration movie was deleted.
A movie is played back automatically.
Movies play automatically as a demonstration
movie when the filmed movie fulfills a certain
condition on your camcorder (p. 88). This is
not a malfunction.
Playing back images stored on
memory card on other devices
Images cannot be played back or the
memory card is not recognized.
The playback device does not support playing
back memory cards (p. 4).
Editing movies/photos on your
camcorder
Unable to edit.
Unable to edit because of the condition of the
image.
A movie cannot be divided.
A movie that is too short cannot be divided.
A protected movie cannot be divided.
A photo cannot be captured from a
movie.
The recording media where you want to save
photos is full.
Set the 2D/3D switch to 2D (p. 26).








