Sony HDR-TD10 - Manual (Page 88)


Table of C
on
ten
ts
Enjo
y U
seful F
unc
tions
Inde
x
US
Demo Mode
When the camcorder is connected to a wall
outlet (wall socket) and no operation is
performed for about 10 minutes with the
movie recording mode or the Event View
mode set, a demonstration movie starts
playing.
 On
The demonstration appears.
Off
The demonstration does not appear.
Notes
In the default setting, the demonstration
movie is in the Event Index. If you delete the
demonstration movie, you cannot recover it.
A movie you have recorded will be registered as
the demonstration movie if it satisfies all of the
following conditions.
The movie is protected
The movie is the first one recorded on the
Event Index screen
The movie is saved on the internal recording
media
The movie is recorded when the 2D/3D
switch is set to 3D, or with high definition
image quality (HD) when the 2D/3D switch
is set to 2D
Tips
When you set this item to [On] and touch
, the demonstration starts playing.
If you make one of the following operations, the
demonstration will be suspended. (It appears
again if no operation is performed for about 10
minutes.)
Pressing START/STOP or PHOTO
Touching the screen during the
demonstration
Pressing (View Images)
Pressing MODE
Operating the 2D/3D switch
Pressing 2D/3D DISP
















Date & Time Setting
 Date & Time Format
You can select one from 4 types of date and
time format.
 Daylight Savings/Summer Time
You can change this setting without
stopping the clock. Set to [On] to move the
time forward 1 hour.
 Off
Does not set the summertime.
On
Sets the summertime.
 Date & Time
See page 18.
Area Setting
You can adjust a time difference without
stopping the clock. Select your local area
when using the camcorder in other time
zones. Refer to the world time difference
information on page 104.