Capturing a photo from a movie, Ie (51), Touch – Sony HDR-TD10 User Manual

Page 51

Advertising
background image

1

Table of C

on

ten

ts

Enjo

y U
seful F

unc
tions

Inde
x

US

Do not eject the memory card while dividing

movies on the memory card.

A slight difference may occur from the point

where you touch

and the actual dividing

point, as your camcorder selects the dividing

point based on about 1.0 second (3D)/0.5

second (2D) increments.

If you divide movies that are included in saved

scenarios (p. 46), the scenarios will be deleted.

Only simple editing is available on the

camcorder. Use the supplied software “PMB”

for more advanced editing.

Capturing a photo from
a movie

Touch  [Photo Capture] that
appears on the playback screen
of a movie.

The [Photo Capture] screen appears.

Touch

to play back movies.

Touch

at the point where you

want to capture a photo.

The movie pauses.

Touch

/

to adjust the

capturing point with more
precision.

Touch

.

When capturing is finished, the screen

returns to pause.

Notes

The image size is fixed based on the image

quality of the movie. If the movie was recorded

with one of the following image quality levels,

the image size will be set as shown below.

High definition image quality (HD): 2.1 M

(16:9)

Wide aspect ratio (16:9) with standard

definition image quality (STD): 0.2 M (16:9)

4:3 aspect ratio with standard definition

image quality: 0.3 M (4:3)

The recording medium where you want to save

photos should have enough free space.

The recording date and time of captured photos

is the same as the recording date and time of

the movies.

If the movie you are capturing from has no data

code, the recording date and time of the photo

will be the date and time you captured from

the movie.

Returns to the beginning of the selected

movie

Advertising