Sony FWD-50PX1 - Manual (Page 84)

34
(GB)
Setting Auto Wide
An identification control signal is transmitted with the
video signal in some ordinary television and Wide
Clear Vision broadcasts, etc. The Auto Wide function
faithfully reproduces images based on this
identification control signal or enlarges various types
of pictures to the optimum size regardless of this
identification control signal.
In addition, ordinary television broadcasts having an
aspect ratio of 4:3 can also be enlarged and displayed
at an aspect ratio of 16:9.
Identification Control Signal
This is a control signal for faithfully reproducing the
aspect ratio of the original image on a television
screen. Images that contain this signal consist of the
following:
• Wide Clear Vision broadcasts
• Images recorded with a television camera containing
aspect ratio information (ID-1 format).
• Television broadcasts containing a signal for setting
the aspect ratio to 4:3.
1
Press MENU.
The main menu appears on the display panel.
, t o s e l e c t , , t o ENTER
P i c t u r e / S o u n d C o n t r o l
P i c t u r e M o d e : S t a n d a r d
A d j u s t P i c t u r e
A d j u s t S o u n d
e n t e r a d j . m e n u
2
Press M/m to move the cursor (yellow) to “Screen
Control” and press ENTER.
The Screen Control menu appears on the display
panel.
S c r e e n C o n t r o l
W i d e S e t u p
W i d e M o d e : 4 / 3
S c r e e n Z o o m :
S c r e e n S i z e
S c r e e n S h i f t
A d j u s t P i x e l
R e s e t
e n t e r s e t m e n u
, t o s e l e c t , , t o ENTER
3
Press M/m to move the cursor (yellow) to “Wide
Setup” and press ENTER.
The following menu appears on the display panel.
, t o s e l e c t , , t o ENTER
S c r e e n C o n t r o l
A u t o W i d e : O f f
4 : 3 M o d e :
S y n c M o d e : H / C o m p
s e t
W i d e S e t u p
4
Press M/m to move the cursor (yellow) to “Auto
Wide” and press ENTER.
The following menu appears on the display panel.
S c r e e n C o n t r o l
A u t o W i d e
4 : 3 M o d e
, t o s e l e c t , p r e s s
t o r e t u r n
ENTER
W i d e S e t u p
O f f
O n
5
Select an Auto Wide setting with M/m.
Off : Images are reproduced as-is.
On : The image is enlarged and displayed in the
most appropriate aspect ratio.
6
Press ENTER.
The menu returns to the Wide Setup menu.
7
Select “4:3 Mode” with M/m and press ENTER.
The following menu appears on the display panel.
S c r e e n C o n t r o l
W i d e S e t u p
A u t o W i d e : O n
4 : 3 M o d e
, t o s e l e c t , p r e s s
t o r e t u r n
ENTER
4 / 3
E x p d . 4 / 3
8
Select the 4:3 Mode with M/m.
4/3 : Pictures with a 4:3 aspect ratio are displayed
as-is.
Expd.4/3 : Pictures with a 4:3 aspect ratio are
displayed after being enlarged to an aspect
ratio of 16:9. (When there is no discriminating
control signal.)
Picture Enlargement