Sony FWD-50PX1 - Manual (Page 90)

40
(GB)
Screen Saver Function
(1) Press M/m to move the cursor (yellow) to
“Start Time” and press ENTER.
The following menu appears and the
background of the hour is displayed in relief.
C u s t o m S e t u p
S c r e e n S a v e r
P i c . I n v e r s i o n : A u t o
S t a r t T i m e : 0 0 : 0 0
E n d T i m e : 0 0 : 0 0
(2) Set the hour when the image is to be reversed
with M/m and press ENTER.
The setting for the hour is entered and the
background of the minute is displayed in
relief.
(3) Set the minute with M/m and press ENTER.
The setting for the minute is entered. Press <
to return to the screen shown in step 5 .
(4) Similarly, set the time when the Pic. Inversion
function is to be cancelled.
The display image will be reversed at the Start
Time and will return to the original display
image at the End Time. This cycle is carried
out automatically once a day.
Note
If you set Start Time and End Time to the same time,
the setting of Start Time takes priority over that of
End Time. The display image does not return to the
original image at the End Time. If the Pic. Inversion
program is activated when the color tone of the image
has already been reversed, the reversing is terminated.
Changing the Image Position
Automatically
1
In the Screen Saver menu, press M/m to move the
cursor (yellow) to “Pic. Orbit” and press ENTER.
The following menu appears on the display panel.
, t o s e l e c t , , t o
s e t
C u s t o m S e t u p
S c r e e n S a v e r
P i c . O r b i t
O r b i t : O f f
O r b i t R a n g e : S m a l l
O r b i t C y c l e : 5 m i n
ENTER
2
Press M/m to move the cursor (yellow) to “Orbit”
and press ENTER.
The following menu appears on the display panel.
C u s t o m S e t u p
S c r e e n S a v e r
P i c . O r b i t
O r b i t :
O r b i t R a n g e : S m a l l
O r b i t C y c l e : 5 m i n
, t o s e l e c t , p r e s s
t o r e t u r n
ENTER
O f f
O n
3
Select the Orbit mode with M/m.
Off: Cancel the Pic. Orbit function.
On: Set the Pic. Orbit function.
4
Press ENTER.
The menu returns to the Pic. Orbit menu.
5
Select Orbit Range (moving distance) or Orbit
Cycle (time) with
M/m and press ENTER.
The following values can be selected.
Orbit Range : Small, Mid, Large
Orbit Cycle : 10sec, 30sec, 1min, 5min
The following menu appears on the display panel.
(The illustration below is for selecting Orbit
Range.)
S m a l l
M i d
L a r g e
C u s t o m S e t u p
S c r e e n S a v e r
P i c . O r b i t
O r b i t : O f f
O r b i t R a n g e :
O r b i t C y c l e
, t o s e l e c t , p r e s s
t o r e t u r n
ENTER
6
Adjust the Orbit Range or Orbit Cycle with M/m
and press ENTER.
When both Pic Inversion and Pic. Orbit are
set to ON
If the Pic. Orbit function is actuated while the picture
is reversed, the reversed picture is displayed changing
position.