Sony DCR-IP5 - Manual (Page 113)

113
“
Memory Stick
”
Operations
Using a “Memory Stick” – introduction
Selecting the still image quality mode
You can select the image quality mode for still image recording. The default setting is
FINE.
(1) Set the POWER switch to MEMORY.
(2) Select FN, then press the center z on the control button. The PAGE1 screen
appears.
(3) Select MENU, then press the center z on the control button. The menu
appears.
(4) Select , then press the center z or B on the control button.
(5) Select STILL SET, then press the center z or B on the control button.
(6) Select QUALITY, then press the center z or B on the control button.
(7) Select the desired image quality mode, then press the center z on the control
button.
(8) Press DISPLAY to turn off the menu.
2
FN
3
4
MEMORY SET
STILL SET
MOVIE SET
SLIDE SHOW
DELETE ALL
FORMAT
RETURN
5
MEMORY SET
STILL SET
PIC MODE
QUALITY
RETURN
SINGLE
6
MEMORY SET
STILL SET
PIC MODE
QUALITY
RETURN
7
MEMORY SET
STILL SET
PIC MODE
QUALITY
RETURN
STANDARD
REMAIN
8
FINE
REMAIN
5
1
8
MENU
MEMORY/
NETWORK
VCR
CAMERA
(CHG)
POWER
OFF
ON
MODE