Sony DCR-IP5 - Manual (Page 38)

38
Checking the recording – END SEARCH
You can go to the end of the last recorded point.
(1) In standby mode, select FN, then press the center z on the control button. The
PAGE1 screen appears.
(2) Select PAGE2, then press the center z on the control button. The PAGE2
screen appears.
(3) Select END SCH, then press the center z on the control button.
The last 5 seconds of the recorded section are played back and your camcorder
returns to the standby mode. You can monitor the sound from the speaker.
To return to the FN screen
Select EXIT, then press the center z on the control button.
To stop searching
Select END SCH, then press the center z on the control button again.
Even if you remove the cassette
The end search function works.
1
FN
2
3
END
SCH
PAGE2