Sony DCR-IP5 User Manual
Page 167
167
Troubleshooting
Types of trouble and their solutions
When operating using a “Memory Stick”
– DCR-IP7BT only
Symptom
Cause and/or Corrective Actions
• The POWER switch is not set to MEMORY.
c
Set it to MEMORY (p. 118).
• The “Memory Stick” is not inserted.
c
Insert a “Memory Stick” (p. 110).
• The “Memory Stick” has already been recorded to its full
capacity.
c
Delete unnecessary images and record again (p. 150).
• An incorrectly formatted “Memory Stick” is inserted.
c
Format the “Memory Stick” using your camcorder or
use another “Memory Stick” (p. 105).
• The write-protect switch on the “Memory Stick” is set to
LOCK.
c
Release the lock (p. 108).
• The image is protected.
c
Cancel image protection (p. 149).
• The write-protect switch on the “Memory Stick” is set to
LOCK.
c
Release the lock (p. 108).
• The write-protect switch on the “Memory Stick” is set to
LOCK.
c
Release the lock (p. 108).
• The write-protect switch on the “Memory Stick” is set to
LOCK.
c
Release the lock (p. 108).
• The write-protect switch on the “Memory Stick” is set to
LOCK.
c
Release the lock (p. 108).
• The INDEX screen is not displayed.
c
The protect marks cannot be written when the single
screen is displayed (p. 149).
• The write-protect switch on the “Memory Stick” is set to
LOCK.
c
Release the lock (p. 108).
• The INDEX screen is not displayed.
c
The print marks cannot be written when the single
screen is displayed (p. 154).
• You are trying to write a print mark on a moving picture.
c
Print marks cannot be written to a moving picture.
The “Memory Stick” does not
function.
Recording does not function.
The image cannot be deleted.
You cannot format the “Memory
Stick.”
Deleting all the images cannot be
carried out.
You cannot protect an image.
You cannot write a print mark on a
still image.
(continued on the following page)