Sony DCR-IP5 - Manual (Page 143)

143
“
Memory Stick
”
Operations
Dubbing images recorded on the
“Memory Stick” onto the tape
– DCR-IP7BT only
You can dub a still image or title recorded on a “Memory Stick” to a tape. You can also
use the Remote Commander to do this operation.
Before operation
•Insert a tape to be recorded into your camcorder.
•Insert a “Memory Stick” into your camcorder.
(1) Set the POWER switch to VCR.
(2) Locate the desired recording start point of the tape, then stop the tape.
(3) Select
PB, then press the center z on the control button. Next, select the still
image you want to dub by selecting –/+.
(4) Select FN, then press the center z on the control button. The PAGE1 screen
appears.
(5) Select PAGE3, then press the center z on the control button. The PAGE3
screen appears.
(6) Select q REC CTRL, then press the center z on the control button. The q
REC CTRL appears.
(7) Select REC START, then press the center z on the control button. The
camcorder starts dubbing. To pause the dubbing, select REC PAUSE, then
press the center z on the control button.
(8) When you try to dub another image, select –/+, then press the center z on the
control button and carry out step 7.
6,7
100–0026
– +
4
FN
5
PAGE3
1
REC
PAUSE
REC CTRL
26/26
MEMORY PLAY
RET.
REC
START
100–0026
– +
REC
PAUSE
REC CTRL
0:00:07
MEMORY PLAY
RET.
REC
START
MEMORY/
NETWORK
VCR
CAMERA
(CHG)
POWER
OFF
ON
MODE