Sony DCR-IP5 - Manual (Page 50)

50
To return to the FN screen
Select RETURN, , then press the center z on the control button. The PAGE1
screen appears. Next, select EXIT, then press the center z on the control button.
In wide mode, you cannot select the following functions:
– Old movie
– Bounce
During recording
You cannot select or cancel the wide mode. When you cancel the wide mode, set your
camcorder to the standby mode and then set 16:9WIDE to OFF in the menu settings.
Connection for a TV
Pictures recorded in 16:9WIDE mode automatically appear on the TV screen at full size
when:
– You connect your camcorder to a TV that is compatible with the video ID (ID-1/ID-2)
system.
– You connect your camcorder to the S video jack on the TV.
ID-1 system
The ID-1 system sends aspect ratio information (16:9, 4:3, or letter box) with video
signals. If you connect a TV compatible with the ID-1 system, the screen size is
automatically selected.
ID-2 system
The ID-2 system sends a copyright protection signal with ID-1 signals inserted between
video signals when you connect your camcorder to other equipment using the A/V
connecting cable.
Using the wide mode