Self-diagnosis display – Sony DCR-IP5 User Manual

Page 170

Advertising
background image

170

C:21:00

LCD screen or Viewfinder

Self-diagnosis display

•C:ss:ss

You can service your camcorder
yourself.

•E:ss:ss

Contact your Sony dealer or local
authorized Sony facility.

Self-diagnosis display

Your camcorder has a self-diagnosis
display function.
This function displays the current
condition of your camcorder as a 5-digit
code (a combination of a letter and
figures) on the screen. If a 5-digit code is
displayed, check the following code
chart. The last 2 digits (indicated by
ss

) will differ depending on the state

of your camcorder.

Five-digit display

Cause and/or Corrective Actions

• You are using a battery pack that is not an

“InfoLITHIUM” battery pack.

c

Use an “InfoLITHIUM” battery pack.

• Moisture condensation has occurred.

c

Remove the cassette and leave your camcorder for at
least 1 hour to acclimatize it (p. 179).

• The video heads are dirty.

c

Clean the heads using the cleaning cassette (p. 180).

• A malfunction other than the above that you can service

has occurred.

c

Remove the cassette and insert it again, then operate
your camcorder.

c

Disconnect the power cord of the AC adaptor or remove
the battery pack. After reconnecting the power source,
operate your camcorder.

• A malfunction that you cannot service has occurred.

c

If the same code appears again after you remove and
attach the power source, contact your Sony dealer or
local authorized Sony service facility and inform them of
the 5-digit code. (example: E:61:10)

C:04:ss

C:21:ss

C:22:ss

C:31:ss
C:32:ss

E:61:ss

If you are unable to rectify the problem even if you try corrective actions a few times,
contact your Sony dealer or local authorized Sony service facility.

Advertising