Sony DCR-IP5 - Manual (Page 60)

60
Using the PROGRAM AE function
(1) In standby or MEMORY (DCR-IP7BT only) mode, select FN, then press the
center z on the control button. The PAGE1 screen appears.
(2) Select MENU, then press the center z on the control button. The menu
appears.
(3) Select PROGRAM AE via , then press the center z or B on the control
button.
(4) Select a desired PROGRAM AE mode, then press the center z on the control
button.
(5) Press DISPLAY to turn off the menu. The PROGRAM AE mode indicator
appears at the lower-left corner on the screen.
To return to the FN screen
Select RETURN, , then press the center z on the control button after step 4. The
PAGE1 screen appears. Next, select EXIT, then press the center z on the control button.
To turn the PROGRAM AE function off
Set PROGRAM AE to AUTO in the menu settings in step 4.
Notes
•Because your camcorder is set to focus only on subjects in the middle to far distance in
these modes, you cannot take close-ups in the following modes:
– Spotlight
– Beach & ski
•Your camcorder is set to focus only on distant subjects in the following modes:
– Sunset & moon
– Landscape
3,4
1
FN
2
MENU
MANUAL SET
PROGRAM AE
P EFFECT
WHT BAL
AUTO SHTR
RETURN AUTO
SPOTLIGHT
PORTRAIT
BEACH&SKI
SUNSETMOON
LANDSCAPE
LOW LUX
MANUAL SET
PROGRAM AE
P EFFECT
WHT BAL
AUTO SHTR
RETURN SPOTLIGHT
5