Sony VGF-WA1 - Manual (Page 16)

16
VGF-WA1 3-094-116-11(1)
Rear view
 OPTICAL OUT jack
Use this jack to connect the device to another
audio device with an optical cable (not
supplied).
 USB port
Use this port to connect the device with a
USB cable to a computer. This option allows
you to set up the device using the included
software.
 LINE OUT jacks
Use these jacks to connect to the audio input
jacks of an audio device.
 AUX jack
Use this jack to connect to an audio device
(page 36).
 DC IN 16V jack
Connect the supplied AC adapter to this
jack.
 BATTERY switch (bottom side)
Turn this switch to ON to use the internal
battery (page 30).
Wireless Adapter
 AUTO INSTALL switch
The Wireless Adapter contains some
software. If you turn this switch to ON and
insert the Wireless Adapter into a USB port
of a computer, the software installer starts
automatically (page 22). Once you have
installed the software, turn this switch to
OFF for normal use.
 WIRELESS lamp
This lamp shows the connection status with
a computer.
On (without flashing):
This device is connected to a computer.
Flashing on and off :
This device is communicating with a
computer.
Off:
This device is not connected to a
computer.