Sony VGF-WA1 - Manual (Page 36)

36
VGF-WA1 3-094-116-11(1)
Listening to an audio
device (Auxiliary
Function)
You can connect an audio device, such as a
Walkman, to this product to listen to music from
the audio device via the speakers of this device.
1
Connect an audio device to the AUX
jack of this device.
2
Press the AUX button.
The AUX lamp lights up and this device
switches to the Auxiliary Function.
3
Play music on the audio device.
The music on the audio device is played
via the speakers of this device.
Press VOLUME +/- to adjust the volume.

Tip

If the output level of the audio device is too high
and the audio is distorted, you can adjust the
sensitivity of the AUX jack by setting the [Options]
– [AUX Sensitivity] option.
Notes

You cannot operate the audio device through this
device.

Use a non-resistor type cable to connect the audio
device to this device.
Listening to music files
stored on the internal
memory (Internal
Memory Function)
While playing a music file that is stored on a
computer using the PC Streaming Function, you
can download the music file to the internal
memory (128 MB) of this device. Then, you can
play the downloaded music file even when
disconnected from the computer.
Demonstration mode
If you have not downloaded a music file to the
internal memory, you can start the demonstration
mode of this device by switching to the Internal
Memory Function.
This device comes preinstalled with sample music
files (about 3.8 MB) for a demonstration.
After you download a music file, the
demonstration mode does not work.
Downloadable file formats

ATRAC3

ATRAC3plus

MP3

WMA 1)

AAC

Linear PCM (WAV)
1) You cannot download a copyrighted file in this
format.
Notes

You may not be able to download some files
depending on your computer. For details, see
“Playable/downloadable file formats” (page 62).

Some files are encoded into ATRAC3 (132 kbps)
format when downloading. It may take a while to
complete.