Sony VGF-WA1 - Manual (Page 43)

43
VGF-WA1 3-094-116-11(1)
Oper
ation
7
Press

/

and ENTER to set the
playback content.
If you select [Yes], the currently playing
content is played when turned on by the
On-Timer.
If you select [No], the content that you set
last time is played.
8
Press VOLUME +/- to adjust the
playback volume, and then press

/

and ENTER to set the volume.
If you select [Yes], the current volume is
set when turned on by the On-Timer.
If you select [No], the volume you set last
time remains set.
“Confirm On-Timer settings” appears.
9
Press

/

to select [OK], and then
press ENTER.
The On-Timer is set and appears on
the playback screen.
Three minutes prior to the time you set,
this device prepares for the On-Timer
playback.

Tips

If you do not want to set the Finish Time, set it to
[--:--].

When you are setting the On-Timer in PC
Streaming Function or in Internal Memory
Function, the playback mode changes temporarily
to [1 Repeat]. After completing the setting, it is
restored.

If the specified content has been deleted before the
On-Timer playback starts or if the content cannot
be found, an alarm sounds at the start time. Press
any buttons to stop the alarm.

If the time periods for the timer1 and timer2
overlap, the timer that is set to start earlier
overrides the later one.
Notes

You cannot use the On-Timer function in
Auxiliary Function.

If you fully shut down this device (page 31), the
On-Timer settings are reset.

If this device has already been turned on before
three minutes from the start time of the On-Timer,
the On-timer is not activated.