Sony VGF-WA1 - Manual (Page 41)

41
VGF-WA1 3-094-116-11(1)
Oper
ation
Enhancing the stereo feeling
(VPT Wide Stereo)
By using VPT (Virtual Phone Technology), the
virtual distance between the right and left
speakers is increased, and the stereo feeling is
enhanced.
1
Press SETTINGS.
2
Press

/

to select [Sound], and then
press ENTER.
3
Press

/

to select [Effects], and then
press ENTER.
4
Press

/

to select [VPT Wide Stereo],
and then press ENTER.
VPT Wide Stereo is activated and
appears on the playback screen.
Note

You cannot activate VPT Wide Stereo when:
– [Options] – [Audio Out] is set to
[Line/Optical].
– Headphones are plugged into this device.
Adjusting the acoustic
response of the speakers
(Digital Linear Phase)
Adjusts the phase response and frequency
response of the speaker’s mid-high range to
achieve a highly precise localization of sounds and
a feeling of greater depth.
1
Press SETTINGS.
2
Press

/

to select [Sound], and then
press ENTER.
3
Press

/

to select [Effects], and then
press ENTER.
4
Press

/

to select [D-Linear Phase],
and then press ENTER.
5
Press

/

to select the desired type,
and then press ENTER.
Digital Linear Phase is activated and
appears on the playback screen.
Digital Linear Phase setting options
Option Description
Type A
(default)
Attains a flat frequency response
such as with monitor speakers,
suitable for a wide variety of
genres, from pops to classics.
Type B Stresses the middle range audio,
ideal for vocals.
Type C Attains an intermediate response
between [Type A] and [Type B].
Note

You cannot activate Digital Linear Phase when:
– [Options] – [Audio Out] is set to
[Line/Optical].
– Headphones are plugged into this device.