Sony VGF-WA1 - Manual (Page 53)

3
VGF-WA1 3-094-116-11(1)
O
thers
6
Press

/

to select from [WEP64bit],
[WEP1bit], [WPA-PSK TKIP], [WPA-
PSK AES], or [Off], and then press
ENTER.
If you select [WEP64bit], [WEP128bit],
[WPA-PSK TKIP], or [WPA2-PSK AES],
you can enter a hexadecimal encryption
key.
Encryption key
Number of
characters
WEP64bit 10 characters
WEP128bit 26 characters
WPA-PSK TKIP 64 characters
WPA2-PSK AES 64 characters
If you select [Off], the IP address setting
screen appears.
7
Press

/

to select [Auto(DHCP)] or
[Manual], and then press ENTER.
If you select [Auto(DHCP)], the Digital
Wireless Audio obtains an IP address
automatically.
If you select [Manual], you can set an IP
address manually. Enter an IP address,
subnet mask, and default gateway.
The DNS server setting screen appears.
8
Press

/

to select [Auto] or
[Manual], and then press ENTER.
If you select [Auto], the Digital Wireless
Audio obtains the DNS server settings
automatically.
If you select [Manual], you can set the
DNS server settings manually. Enter your
primary DNS server and secondary DNS
server.
The setting confirmation screen appears.
Note

If you set the [IP Address Setting] option to
[Manual] in step 7, you can only select
[Manual] for [DNS Server Settings] option in
step 8.
9
Press

/

to select [OK], and then
press ENTER.
The [Network Settings] option is set to
[Access Point].
This device restarts automatically, and
waits for a wireless LAN connection.