Sony VGF-WA1 - Manual (Page 33)

33
VGF-WA1 3-094-116-11(1)
Oper
ation
4
Press

/

to select an unwanted
server, and then press ENTER.
Each time you press ENTER, the check box
status (checked or unchecked) changes.
To check all the check boxes, choose [Select
all] and then press ENTER.
5
Press

/

to select [OK], and then
press ENTER.
All the servers you checked are deleted.
Note

Servers that are working do not appear on the list,
and you cannot delete them from the list.
To select a server manually every time
At the default settings, this device automatically
connects to the last connected server when it
changes to the PC Streaming Function.
If you want to select a server manually whenever
you change to the PC Streaming Function, set the
[Server Auto Connect] option to [Off].
1
Press SETTINGS.
2
Press

/

to select [Server Settings],
and then press ENTER.
3
Press

/

to select [Server Auto
Connect], and then press ENTER.
4
Press

/

to select [Off], and then
press ENTER.
Whenever you change to the PC Streaming
Function, the server selection screen will
appear.
Selecting music from the list
(Browse Function)
You can move to the beginning of the desired
music and start playback.
The information that appears in browse mode,
such as title name, artist name, album name,
genre, registered folder, etc., varies depending on
the server.
If you enter browse mode by selecting a server,
start at step 3.
1
Press the PC button.
The PC lamp lights up, and this device
changes to the PC Streaming Function.
2
Press TOP or BACK.
This device changes to the browse mode,
and the playable music list appears.
3
Press

/

to select the desired music,
and then press ENTER.
The playback of the selected music starts
and the playback screen appears.
Notes

You cannot rearrange the playable music list.

If you do not operate for one minute during
browsing, browse mode is cancelled.

Tips

You can press BACK while browsing to display the
area of the upper layer.

You can press BACK during playback to display
the playing area. You can press TOP to display the
top layer area.

You can press / while browsing to switch
to the previous or next page.