APPLIED ENGINEERING RamKeeper - Manual (Page 30)

Again, use the up and down arrow keys to select the
option. The different options and their functions are
described below.
To set your ROM Disk to the size you want, you’ll need to
go into the IIGs Classic Desk Accessories menu, select the
AE RamKeeper
option and set the ROM Disk size using
the
Initialize
ROM Disk option.
Initialize ROM Disk
The only option you can directly alter in this menu is the
ROM Disk Size
setting.
When you first boot the RamKeeper, it creates a 63K ROM
Disk. However, the Memory Allocated
For ROM setting
will show a 64K ROM Disk. This is because RamKeeper
uses 1K of protected memory for itself.
RamKeeper (TM)
Initialize ROM Disk
ROM Disk Size: 63k
Memory Allocated For ROM: 64k
Memory Available For RAM: 1664k
...System
Status... 256k
Main Memory: 1472k
Expanded Memory: 1728k
Total Memory
63k
Current ROM Disk Size:
Initialize ROM Disk Menu
Increasing or decreasing the
ROM Disk Size
setting will
also change both the Memory Allocated For ROM and
the Memory Available For RAM settings accordingly.
Chapter Two - RamKeeper Firmware 21