APPLIED ENGINEERING RamKeeper - Manual (Page 49)

2.) Select Æ Cache from the AW2 Expander main menu or execute the file,
AECACHE.SYSTEM.
While executing, the program will display the Æ startup screen accompanied by
the message:
INSTALLING....
at the bottom of the screen.
If the Cache program does not find a properly installed
RamKeeper or GS-RAM card it will print the following
message to the monitor:
REQUIRES GS-RAM
OR RAMKEEPER W/ MEMORY CARD
IN IIGS MEMORY EXPANSION SLOT
* Important: Switching from ProDOS 8 to ProDOS
16 with
AECACHE
.
SYSTEM operating will cause
unpredictable results. If you want to switch
between operating systems, follow the directions
for ProDOS 8 and ProDOS 16 following.
ProDOS 16 and ProDOS 8 or ProDOS 16 Only
If you’ll only be using ProDOS 16, or if you’ll be switching
between 16 and 8, use the IIGS Finder or System Utilities to
copy the
Aecache
.
Setup file (from the AW2 Expander
disk) into the System. Setup folder located within the
ProDOS 16 System folder on your boot disk(s) (see below).
S Y S T E M S Y S T E M . S E T U P A E C A C H E . S E T U P
Where the file goes
Booting these modified disks will load the AE Cache
option into your Classic Desk Accessories menu.
* Note: You must cold boot into ProDOS 16 to
enable the
AECACHE
.
SETUP
file to work under
both systems. You can then switch between
ProDOS 8 and ProDOS 16 without deinstalling or
reinstalling the
Cache
If the Cache program does not find a properly installed
RamKeeper or GS-RAM card, the AE Cache option won't
appear in the Desk Accessories menu.
40 RamKeeper