Alpine INA-W900 - Manual (Page 18)

16
-EN
How to view the Display
• Be sure to touch the button lightly with the pad of your finger on the
display to protect the display.
• If you touch a button and there is no reaction, remove your finger
from the display, and try again.
Here is an example explanation for the Radio mode display on how to
recall a source.
1
Press SOURCE/ on the unit.
The SOURCE selection screen is displayed.
Display example for SOURCE selection screen
Changes the items of source selection list.
Changes to the Telephone Menu screen.
(When the optional BLUETOOTH INTERFACE
(KCE-400BT) is connected and “BLUETOOTH IN” is set
to Adapter (page 55).)
Displays the rear view camera.
(When an optional rearview camera HCE-C107D, etc. is
connected and Camera IN is set to ON).
Changes to main source screen.
Displays the source selection list.
(The kind of source modes that are displayed varies
depending on connection and setting).
Changes to SETUP main screen.
2
Touch [Radio].
The screen changes to the Radio mode main display.
• If your desired source is not displayed on the screen, touch [ ] to
change the items of the source selection list first. Then touch the
desired source key.
Display example for FM Radio main screen
Displays the source name, such as radio band, etc.,
that is selected.
Changes to the Bass
* 1 , Treble * 1 and Subwoofer * 2 Level
adjustment screen directly.
When an optional IMPRINT audio processor (PXA-H100)
is connected to this unit, MEDIA XPANDER level may
also be adjusted directly.
• If the optional IMPRINT audio processor (PXA-H100) is
connected, Defeat and MultEQ must be set to OFF to adjust the
MEDIA XPANDER directly.
Displays the time.
Function Guide:
The function guide display varies depending on each
source.
The contents of the function guide change by touching
[P1/2]* 3 , [P1/3]* 3 or [P1/4]* 3 on the function guide, and
many other operations can be performed.
Displays the icon of current source or artwork image *
4 .
If the GUIDEVIEW WINDOW™ mode is activated, the
information of Navigation system will be displayed in this
area.
*1
Adjustment cannot be performed when DEFEAT is set to ON.
*2
Adjustment cannot be performed when SUBWOOFER is set to OFF
(page 45).
*3
Display may vary depending on the connected devices.
*4 If the playing song contains artwork data, the artwork image can be
displayed (Only for USB Audio and iPod mode).
Soft button operation
About the button descriptions used in this Owner’s Manual
• Soft buttons, ones found in the display, are shown in bold
enclosed in brackets, [ ] (e.g. [Exit]).
• Whenever a soft button and a head unit button have the same
function, the explanations in this Owner’s Manual will describe
the function of the soft button.
Recalling the Source