Alpine INA-W900 - Manual (Page 79)

77
-EN
Select the desired Folder (Folder up/
down)
If you listen to a file from a selected folder, the folder can be changed.
Touch [ ] or [ ] to select the folder.
Creating the playlist from the Artist/
Album information of the current song
When a song is played back, a playlist about all the songs with the same
Artist or Album stored in the USB memory or Portable audio player can
be created.
1
Touch [P1/2] when a song is played back.
The function guide changes.
2
Touch [X-RPT ARTIST] or [X-RPT ALBUM] to
create the playlist.
• According to the artist/album information of the current song, a
playlist containing all the songs with the same artist/album (within
the same BANK) are made into a playlist. The playlist begins
playback immediately.
About MP3/WMA/AAC File of USB
Memory
Playing back MP3/WMA/AAC
MP3/WMA/AAC files are prepared, then stored to a USB
memory. A media player or jukebox can also be used to sync
music to a portable device. This unit can recognize at least 256
folders (including root folder) and 10,000 files per folder stored
in USB memory. Playback may not be performed if a USB
memory/Portable audio player exceeds the limitations
described above. Do not make a file’s playback time more than
1 hour.
Media supported
This device can play back USB memory/Portable audio player
media.
Corresponding File Systems
This device supports FAT 12/16/32 for USB memory device/
Portable audio player.
An iPhone/iPod can be connected to this unit, by using the USB
connection cable. When this unit is connected by using the cable, the
controls on the iPod are not functional.
• Internet or telephone functions, etc., of the iPhone or iPod
touch are not controllable from the unit, but these functions
can be controlled using the iPhone or iPod touch itself.
• If you connect an iPhone to this unit, it can be used as an
iPod. If you use iPhone as a hands-free phone, you need the
optional BLUETOOTH INTERFACE (KCE-400BT).
• This unit does not support the iPod FULL SPEED connection.
Therefore, even if you connect an iPhone/iPod using the
FULL SPEED connection cable (KCE-433iV) on the
BLUETOOTH INTERFACE (KCE-400BT), you cannot operate
the iPhone/iPod.
• To watch the video screen of the video file in the iPod
(iPhone, iPod touch, iPod classic, iPod with Video, Third
generation iPod nano and forth generation iPod nano), do the
operation as described below.
Your vehicle must be parked with the ignition key in the ACC or ON
position. To do this, follow the procedure below.
1 Push the foot brake to bring your vehicle to a complete
stop at a safe location. Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 While the parking brake is being engaged the second
time, release the foot brake.
• For automatic transmission vehicles, place the transmission lever in
the Park position.
About iPhone/iPod models usable with this unit
• Confirmed devices regarding Made for iPod. Correct function
of earlier versions cannot be guaranteed.
iPod touch (2nd generation): Ver.3.0
iPod nano (4th generation): Ver.1.0.2
iPod classic (120 GB only): Ver.2.0.1
iPod touch (1st generation): Ver.3.0
iPod nano (3rd generation): Ver.1.1.3 PC
iPod classic (80 GB, 160 GB only): Ver.1.1.2 PC
iPod nano (2nd generation): Ver.1.1.3
iPod with video: Ver.1.3
iPod nano (1st generation): Ver.1.3.1
• Confirmed devices regarding Works with iPhone. Correct
function of earlier versions cannot be guaranteed.
iPhone 3GS: Ver.3.1
iPhone 3G: Ver.3.0
iPhone: Ver.3.0
Playback
1
Press SOURCE/ on the unit.
The SOURCE selection screen is displayed.
2
Touch [iPod].
The display shows the iPod mode screen.
3
Touch [ ] or [ ] to select the desired song.
iPhone/iPod
(Optional)