Alpine INA-W900 - Manual (Page 72)

70
-EN
When the optional rearview camera HCE-C107D, etc. is connected, rear
view video can be output to the monitor.
• A rearview camera with RCA Output connector cannot be connected
to this unit.
• Be sure to set “Camera IN” to ON before using the rearview camera,
refer to “Setting the Rear Camera Input” on page 54.
Switching the Rear Camera Screen
(Optional)
The rear view video will be displayed for the two situations as below.
1
Shift the gear lever to the reverse (R) position.
The rear view image is displayed while the car remains in
reverse.
2
If you shift the gear lever to a position other than
reverse (R), the monitor returns to the previous
screen.
• Be sure to also check behind the car visually. Use the camera image
to assist in showing conditions behind the car.
• This function is effective when the reverse wire is properly connected.
1
Press SOURCE/ on the unit.
The SOURCE selection screen is displayed.
2
Touch (CAMERA).
The Camera mode is activated and the rear view video is
displayed.
3
Touch [Guide On] or [Guide Off] to set whether the
rear camera guide line is displayed.
Touch [ ] to return to the previous screen.
Controlling CD Changer (Optional)
An optional 6-disc or 12-disc CD Changer may be connected to the
INA-W900 if it is Ai-NET compatible. With a CD Changer connected
to the Ai-NET input of the INA-W900, the CD Changer will be
controllable from the INA-W900.
If you connect a changer compatible with MP3, you can play
CD-ROMs, CD-Rs, and CD-RWs containing MP3 files on the
INA-W900.
Using the KCA-410C (Versatile Link Terminal) multiple changers can
be controlled by the INA-W900.
See the Multi-Changer Selection section for selecting the CD Changers
(explained on page 71).
1
Press SOURCE/ on the unit.
The SOURCE selection screen is displayed.
2
Touch [CD CHG.].
The display changes to the CD changer mode screen.
When a 6 Disc CD Changer is connected;
1 Touch [P1/2]*.
The Function Guide display appears.
* When an MP3 compatible CD changer or DVD changer is
connected, touch repeatedly until the disc number is displayed.
2 Touch any one of the select buttons [DISC 1] through
[DISC 6].
DISC 1 through DISC 6 select the discs from the first disc
to 6th disc.
When an MP3 compatible CD changer is connected;
1 Touch [P1/3] twice to change the Function Guide display.
2 Touch any one of the select buttons [DISC 1] through
[DISC 6].
DISC 1 through DISC 6 select the discs from the first disc
to 6th disc.
When a 12-Disc CD Changer is connected;
You can select the disc numbers 1 to 6 in the same manner as
for 6-disc Changer.
Touch [P1/3] twice to select disc numbers 7 to 12.
The function guide display changes so that DISC 7
through DISC 12 represent disc numbers 7 to 12.
• After selecting the desired disc, you can operate in the same way as
for the CD player. For details, see the CD/MP3/WMA/AAC section.
• When an MP3 compatible CD changer is connected, the unit can
play discs containing both audio data and MP3 data.
• The DVD changer (optional) is controllable from the INA-W900 as
well as the CD changer.
Rearview Camera
Operation (Optional)
Displaying the rear view video while the
car is in reverse
Displaying the rear view video manually
Changer
(Optional)