Alpine INA-W900 - Manual (Page 70)

68
-EN
Touch [Call] of the person name or the telephone
number you want to call from the Phone Book list.
The call is placed.
• If one name has several numbers registered in the telephone book,
choose and touch [Call] of the desired number after touching [ ]
of the name, the telephone will be called. Touch [Call] of the name
directly, the default number of the name will be called. Depending on
the connected mobile phone, this function may not be performed.
• If a name cannot be obtained via the phone book, only the telephone
number (default number) is displayed. If both name and number
cannot be obtained, “ID UNSENT” will be displayed.
• If the call history or phonebook of the mobile phone is added or
deleted while it is connected to the unit, the list displayed on the unit
may not be brought up to date. If it is not updated, you cannot
correctly place a call.
You can call the telephone by performing voice operation.
Setting item: Voice Dial
1
Touch [ ] to display the item of Voice Dial.
2
Touch [ ] of Voice Dial.
A message is displayed.
3
Touch [Yes] to activate the voice dial mode.
The voice dial mode is activated, and “Speak” is displayed.
• Touch [No] will return to the Telephone Menu screen.
4
Say the telephone number*, name* you want to call
into the microphone.
* The number and name depend on the voice dial information stored in
the mobile phone.
• If the voice dial fails, the unit will return to normal mode in 30
seconds.
• You can perform this operation only when a voice dial compatible
mobile phone is connected. If the mobile phone is not compatible
with the voice dial, “Failed” is displayed for 2 seconds.
• The Voice Dial function performance depends on the recognition
range of the mobile phone and mounting location of the microphone.
Note when the microphone is mounted.
• This operation cannot be performed when the current source is
BLUETOOTH Audio.
• Voice dial operation depends on the function of the mobile phone.
For details, refer to the Owner’s Manual of the mobile phone.
You can place a call by inputting the telephone number directly by the
numeric keypad screen on the unit.
Setting item: Dial Input
Display example for the Dial Input screen
The numeric keypad screen is displayed. Touch (input)
the telephone number, and then touch [Call].
The call is placed.
• About the numeric keypad
: closes the numeric keypad input screen.
Delete All: deletes all input numbers.
: deletes a previous number.
• The speed dial is recalled and the telephone is called by directly
inputting the number which is registered with the speed dial on the
mobile phone on the numeric keypad screen of this unit (SPEED
DIAL).
BLUETOOTH Audio Function
Audio information of a BLUETOOTH compatible mobile phone, a
portable player, etc., is controllable/playable wirelessly* from this unit.
* To play back audio, a mobile phone or a portable player conforming
to A2DP (Advanced Audio Distribution Profile) or AVRCP (Audio/
Video Remote Control Profile) is required.
Not all functions work with all devices.
• During a call, sound on the BLUETOOTH audio source is muted.
Recalling the BLUETOOTH audio source
1
Press SOURCE/ on the unit.
The SOURCE selection screen is displayed.
2
Touch [ ] until the source icon of BT Audio is
displayed.
3
Touch the [BT Audio] icon.
The BT Audio source is activated and the display changes
to the BT Audio main screen.
Selecting the desired Song
Touch [ ].
Returns the beginning of the song being played back.
Touch [ ].
Forwards the next song.
Pausing
Touch [ / ].
A playback stops. Touching again will resume a playback.
Voice Dial Operation
Dialing a Number Using Direct Dial Input
BLUETOOTH Audio Operation