Alpine INA-W900 - Manual (Page 56)

54
-EN
If an Alpine Ai-NET Auxiliary Input Adapter (KCA-801B) is
connected to the INA-W900, an Auxiliary Source will be allowed to
interrupt the current audio source. For example, you can listen to a
portable MP3 player through your car audio system even with a CD
changer connected and playing. The CD changer will automatically
mute when switched to the AUX Input. For further details on how to use
the Alpine KCA-801B, see your authorized Alpine dealer.
Setting item: IN Int. Mute
Setting contents: OFF / ON
• The auxiliary device being connected must have an Interrupt wire
with a negative trigger for this function to operate automatically.
Otherwise, a separate switch needs to be added to switch it manually.
The unit can display the icon of an external device, such as a telephone,
whenever a phone call comes in to tell you there is a phone call.
Setting item: IN Int. Icon
Setting contents: INT / TEL
For remote control operation, the remote sensor of the external device
(monitor, etc.) can be switched, as you prefer.
Setting item: Remote Sensor
Setting contents: Front / Rear
• The touch panel rear monitor sensor has priority over the remote
control sensor. If the rear monitor (connected to the Alpine rear
monitor output via the Monitor control lead) is touched, the
command is executed regardless of the remote control sensor switch
setting. Note, however, that the remote control sensor that has been
set takes priority if it has been 5 seconds since last touching the
panel.
• When an optional DVD changer or DVD player is connected, and the
remote control sensor is set to Rear, some soft button operations
( [ ] STOP, etc.) cannot be performed. In this case, set the remote
control sensor to Front.
With an optional rear camera connected, rear view video is output to the
monitor. When the rear camera is connected, set this item to ON.
Setting item: Camera IN
Setting contents: OFF / ON
After setting this item to ON, touch [ ], the following
further items can be adjusted.
Rear camera guide line display setting
You can set whether the rear camera guide line is displayed or not.
Further Setting item: Guide Line
Setting contents: OFF/ON
Adjusting the Rear Camera Guide line
You can adjust the rear camera guide line position
Further Setting item: Guide Line Adjustment
1
Touch [ ] of Guide Line Adjustment.
The guide line adjustment screen is displayed.
2
Touch the guide line you intend to adjust.
3
Touch [ ], [ ], [ ] or [ ] to adjust the position of
the guide.
After moving the guide, when you touch [ ], the guides in
the horizontal row are aligned in a row.
4
After the adjustment is completed, touch [OK].
You can touch [Reset] during adjustment to return to the
setting prior to adjustment.
Setting the External Device Interrupt Mode
OFF: The volume level can be adjusted in Interrupt mode.
ON: Sound will not be output. The icon that is set in “Setting
the Interrupt Icon Display” is displayed.
Setting the Interrupt Icon Display
INT: The INT icon appears on the display.
TEL: When the external device (telephone) sends the interrupt
signal, the telephone icon appears on the display.
Switching the function of the remote
sensor
Front: The remote sensor of this unit is effective.
Rear: The remote sensor of the external monitor
connected to AUX OUT of this unit becomes
effective. The remote control operates the
source connected to the AUX OUT terminals.
Setting the Rear Camera Input