Alpine INA-W900 - Manual (Page 26)

24
-EN
Go to Main Menu Go to Address Book
1
Select the desired destination.
2
The Confirm Destination Screen appears. Touch
[Go!] to calculate the route.
Editing Address Book
The lockout function applies to Setup Menu and Edit Address Book.
To edit address book, your vehicle must be parked with the ignition key
in the ACC or ON position. To do this, follow the procedures below.
1 Bring your vehicle to a complete stop at a safe location.
Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 When the parking brake is engaged for the second time,
release the foot brake.
• For automatic transmission vehicles, place the transmission lever in
the Park position.
Go to Main Menu Go to Address Book
1
Select the destination you would like to modify.
2
Touch to edit your entry.
3
Edit Name, Phone Number and Icon or delete the
selected destination.
• Select Delete All to delete all addresses saved in the address book.
Go to Main Menu Go to Coordinates
1
Enter the Latitude of your destination. Touch [OK].
2
Enter the Longitude of your destination. Touch [OK].
3
The Confirm Destination Screen appears. Touch
[Go!] to calculate the route.
• To use destination options on the Confirm Destination Screen, see
pages 25-27 for details.
Go to Main Menu Go to Intersection
Finding a Intersection by Entering a Street Name First
1
Select by Street.
2
Type in the first street name. Touch [OK].
The list of applicable street names appears. Select the
desired street and input the address number.
3
Input the second street name.
If there is only one street crossing with the first street, the
name of the street automatically appears.
4
Confirm City name if there are more than one city
with the same intersection.
Set a Destination from the Address Book
Set a Destination by Coordinates
Set a Destination by Intersection