Alpine INA-W900 - Manual (Page 39)

37
-EN
Playback
1
Press SOURCE/ on the unit.
The SOURCE selection screen is displayed.
2
Touch the source icon of [DISC].
The display shows the DISC mode screen.
When a CD/MP3/WMA/AAC is inserted into the DISC SLOT
of this unit, with the label side facing up, the unit starts to
play the CD/MP3/WMA/AAC.
3
Touch [ ] or [ ] to select the desired track
(file).
Returning to the beginning of the current track (file):
Touch [ ].
Fast reverse :
Touch and hold [ ].
Advancing to the beginning of the next track (file) :
Touch [ ].
Fast forward :
Touch and hold [ ].
To pause playback
Touch [ / ].
Touching [ / ] again will resume playback.
Inserting/Ejecting a Disc
Refer to “Inserting/Ejecting a Disc” (page 15).
• The INA-W900 model includes a built-in MP3/WMA/AAC unit. You
can play CD-ROMs, DVD-ROMs, CD-Rs, CD-RWs, DVD-Rs,
DVD-RWs, DVD+Rs and DVD+RWs containing MP3/WMA/AAC
files on this unit. Use the format compliant with this unit.
For further information about playing or storing MP3/WMA/AAC
files, refer to pages 38 and 39 before using the unit.
• WMA format files that are protected by DRM (Digital Rights
Management), AAC format files that have been purchased from
iTunes Music Store and files that are copy-protected (copyright
protection) cannot be played back on this unit.
• The unit can play discs containing both audio data and MP3/WMA/
AAC data.
• The track display for CD audio data playback is the track numbers
recorded on the disc.
• Three-inch (8 cm) CDs can be used.
• “Playing MP3/WMA/AAC Data (File Play Mode)” is mentioned on
page 49.
• If an MP3/WMA/AAC disc with many files and folders is played, it
takes a little longer than normal to start playback.
• Touch [ ] to activate the search mode. For operations, refer to
“Search Function” on page 45.
However, the search mode function does not work in the CD changer
mode.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
Repeat Play
Touch [ ] to play back repeatedly the track currently
being played.
The track (file) will be played repeatedly.
Touch [ ] again and select OFF to deactivate Repeat play.
1 Touch [P1/2]*
3
to change the function guide.
2 Touch [ ] and select the desired Repeat play.
* 1 If a CD Changer or an MP3 compatible CD changer is connected
and the Repeat Disc mode is selected, the unit repeatedly plays back
all tracks (files) on the disc selected.
* 2 Only files in a folder are repeatedly played back.
*
3
Display may vary depending on the connected devices.
M.I.X. (Random Play)
Touch [ ] during playback.
The tracks (files) on the disc will be played back in a random
sequence.
To cancel M.I.X. play, touch [ ].
1 Touch [P1/2]* 4 to change the function guide.
2 Touch [ ] and select the desired M.I.X. play.
* 1 If a CD Changer equipped with the ALL function is connected,
ALL will also be selectable.
In this mode, the tracks on all the CDs in the current magazine will
be included in the random playback sequence.
*
2
If an MP3 compatible CD changer is connected, all files in a disc are
played back in random sequence, and playback shifts to the next disc.
*
3
Only files in a folder are played back in random sequence in the
mode.
* 4 Display may vary depending on the connected devices.
• If the search mode (page 45) is activated, the M.I.X. play mode will
be canceled.
Selecting Folders (concerning MP3/
WMA/AAC)
Touch [ ] or [ ] to select the folder.
CD: *
1
(off)
(Repeat
One)
MP3/WMA/AAC:
*
2
*
1 (off)
(Repeat
One)
CD: ALL* 1 (off)
MP3/WMA/AAC:
*
3
*
2 (off) *
3