Alpine INA-W900 - Manual (Page 19)

17
-EN
The numeric keypad input screen is displayed when the DVD mode is
selected for searching a title or chapter. It can also be used for entering a
country code or password for DVD setup, and for selecting a channel
number in the SAT Radio mode etc.
1
Touch [10KEY] on the selected source screen.
2
Touch the desired numeric key.
Display example for numeric keypad
Input screen area
Closes numeric keypad input screen
All input numbers will be deleted.
Previous number will be deleted.
Input number is confirmed.
Numeric keypad
The numeric keypad input screen closes when the area
is touched while displayed.
3
Touch [Enter] to confirm your entry.
Basic Operation
The INA-W900 GPS Navigation Receiver provides an easy-to-use user
interface, clear, easy-to-understand spoken driving instructions, and
award winning design.
INA-W900 is built upon Alpine’s history of navigation success in North
America. Please read this manual carefully. If you have any further
questions about INA-W900’s operation, feel free to call Alpine at 1-
888-NAV-HELP (628-4357) for technical assistance.
With this system, every time when the ignition key is turned to the ACC
or ON positions and navigation mode is activated, the opening screen
will be displayed automatically.
1
Press MAP or NAVI MENU on the unit to activate the
navigation system.
2
Every time you boot up the system, both the
language selection menu and IMPORTANT! are
displayed on the screen. Touch the desired
language.
After the language has been selected, important
information is displayed in each language.
Be sure to read the important information.
3
After you have read this important information,
touch [I Accept].
The map or Navigation Main Menu screen is displayed.
Displaying the Numeric Keypad Input
Screen Navigation
Turning the Navigation System On