Panasonic RRXS350E - Manual (Page 18)

18
When VAS (Voice Activated System) is set, if silence continues for approx. 2 seconds during microphone
recording, the recording is paused automatically. If the unit detects sound, the recording resumes.
● For important recording, set the VAS setting to OFF.
● If the LOW CUT FILTER setting is ON, low frequency sound may be cut out and VAS recording
may not activate. In this case, change the LOW CUT FILTER setting to OFF. (
➜ page 17)
● If the recording is paused with no sound state, “VAS”, recording indicator, and “*” blink. When
[REC *] is pressed from this recording pause state, the status is changed to normal recording
pause state and “VAS” lights up.
Preventing unnecessary recording (VAS)
• When the unit is not in the stop state, press
[STOP g/RETURN].
1 Press [MENU].
2 Press u, i to select “VAS” and
press [q OK] to enter.
3 Press +, – to select “On” and press
[q OK] to enter.
(The factory setting is “OFF”.)
“VAS” is displayed.
To exit the setting screen, press
[STOP g/RETURN].
To start VAS recording, press [REC *].
Adjusting the VAS operation level:
Press u, i during VAS recording.
(The factory setting is “
”.)
● You can adjust the sound detection level from
1 to 5.
● If the audio to record is low, increase the VAS
value (sensitivity level). If the sound is loud,
decrease the VAS value.
VQT4J69
18
VQT4J69_RR-XS350_E_En.indd 18 VQT4J69_RR-XS350_E_En.indd 18 2012/05/25 11:48:00 2012/05/25 11:48:00