Panasonic RRXS350E - Manual (Page 9)

9
The clock is used as a file name (➜ page 38) or to preserve recording date and time information.
Set the correct date and time. The date and time need to be set after the battery is replaced.
Setting the clock
• Turn the power on. (➜ page 8)
• After turning the power on for the first time
after purchase or replacing the battery,
proceed to step
3 .
1 Press [MENU].
2 Press u, i to select “DATE” and
press [q OK] to enter.
3 Press +, – to set
“
” (year) and
press i.
• Set the last two digits of the year.
(“12” in the case of 2012)
4 Press +, – to set “ ” (month) and
press i.
5 Press +, – to set “ ” (day) and
press i.
• To return to the previous setting item,
press u.
6 Press +, – to select the time display
format and press i.
Select “ ” for 24-hour display, and “ ” for
12-hour display.
• The display format that is blinking is
currently selected.
7 Press +, – to set the hour and press
i.
8 Press +, – to set the minute.
To change the setting, press u, i to
move between the items, and then press
+, – again to make the setting.
9 Press [q OK] to enter.
• The date and time are set and the clock
starts to operate.
To exit the setting screen, press
[STOP g/RETURN].
● The clock operates with the monthly loss/gain of approx. 60 seconds at normal temperature.
● The clock setting will be lost if the battery is removed or completely exhausted.
VQT4J69
9
ENGLISH
VQT4J69_RR-XS350_E_En.indd 9 VQT4J69_RR-XS350_E_En.indd 9 2012/05/25 11:47:55 2012/05/25 11:47:55