Panasonic RRXS350E - Manual (Page 21)

21
Shadowing is a learning method to repeat an
example immediately after it is heard. You can use
the shadowing function of this unit to repeat the A-B
repeat section (example) and a no-sound section
(practice). This is convenient for pronunciation or
listening practice for language learning.
• When the unit is not in the stop state, press
[STOP g/RETURN].
1 Press [MENU].
2 Press u, i to
select “ ” and
press [q OK] to
enter.
3 Press +, – to select “On” and press
[q OK] to enter.
The shadowing function turns on.
(The factory setting is “OFF”.)
To exit the setting screen, press [STOP g/RETURN].
4 Select the file you want to play with shadowing
(
➜ pages 10, 13) and press [q OK].
Example
A-B repeat section No-sound section
Practice
5 Press
[ERASE/A-B&].
The start point (A) is
set and “
” (lighting)
and “ ” (blinking) are
displayed.
6 Press [ERASE/A-B&]
at the finish point (B).
The indication changes to
“ ” (lighting), shadowing
starts, and A-B repeat playback
and no-sound playback
repeats. The shadowing icon
lights on during A-B repeat
playback, and blinks during
no-sound playback.
Shadowing icon
Cancelling shadowing:
Press [ERASE/A-B&] again. (Shadowing can also
be cancelled with [STOP g/RETURN], u or i.)
Shadowing
● You cannot set shadowing when the time between the start point (A) and finish point (B) is
approx. 2 seconds or less.
● When only the start point (A) is set and playback continues until the end of the file, the end
becomes the finish point (B) and shadowing begins.
● Shadowing by setting the range using 2 files is not possible.
VQT4J69
21
ENGLISH
VQT4J69_RR-XS350_E_En.indd 21 VQT4J69_RR-XS350_E_En.indd 21 2012/05/25 11:48:01 2012/05/25 11:48:01