Panasonic RRXS350E - Manual (Page 31)

31
8 Play back the external
device and adjust the
input/output level.
1
If the level meter swings
and “ ” is displayed,
the volume of the external
device is too high. Adjust
the volume of the external
device to the range that five
or six “ ” are displayed,
even if the volume is turned
to the maximum.
Number of file
being recorded
Level meter
To reconfigure the line input settings, press
[STOP g/RETURN] and proceed to step 2 again.
2 After you finish adjusting the input/output level,
stop the sound source of the other device at the
position where you want to start recording.
9 Press [REC *] to start recording.
10 Play the external device.
● Read the operating instructions for the connected device.
● Disconnecting the audio cord during recording will stop
recording.
● Change the sound quality as necessary. (➜ page 16)
● If “MIC” or “MUSIC” folder is selected and line input
sound is being recorded, the folder will switch to “LINE”
folder automatically and the recorded files by the line
input are saved to the “LINE” folder.
Listening to the audio
using earphones
Insert
securely.
Connect stereo earphones (not supplied).
Plug type: ø 3.5 mm stereo mini plug
Recommended additional earphones:
Panasonic RP-HV154, RP-HJE120
(the product number is correct as of May 2012.)
Monitoring the
recording in
progress
Adjusting the volume:
You can adjust the volume by
pressing +, –, but the audio that
is recorded is not affected.
Listening to the
audio during
playback
The audio being played back
is output from the speaker on
the front of this unit. Listening
may be difficult in noisy places
due to the speaker output.
In that case, connect stereo
earphones (not supplied).
● The built-in speaker is turned
off when earphones are
connected. VQT4J69
31
ENGLISH
VQT4J69_RR-XS350_E_En.indd 31 VQT4J69_RR-XS350_E_En.indd 31 2012/05/25 11:48:05 2012/05/25 11:48:05